Russian-backed Group Attempts to Compromise Ukrainian Power Grid Using Industroyer2 Malware
As part of their ongoing military assault against neighboring Ukraine, Russian-backed hacker group Sandworm launched a series of cyber attacks that threaten the critical infrastructure of the beleaguered country.
According to Slovak internet security company ESET, on April 8th, 2022 attackers attempted but failed to compromise the Kyiv electric grid using an updated version of the Industroyer malware which was used to attack Ukraine previously, in 2016.
The First Industroyer Attack
Industroyer first garnered attention in December, 2016 when attackers using the malware succeeded in cutting off power to a fifth of Kyiv, the Ukrainian capital city, for over an hour.
Researchers at the time believed the incident was a preliminary test carried out by threat actors who were preparing to launch a much larger scale cyber attack. Industroyer was believed to be the first ever malware specifically designed to target a nation’s electrical grid. Researchers warned that it displayed very high-level technical knowledge of the workings of ICS protocols. The hacker group’s method of attack was to penetrate deep into the network and gain direct control of switches in electrical substations. The 2016 attack was also carried out by the Sandworm group.
Assessing The Industroyer2 Attack
According to a report issued by ESET and UA-CERT, on April 8th, 2022 threat actors succeeded in breaching the Ukrainian power distribution grid once again. However they failed in their ultimate goal to halt electricity distribution, wipe/destroy all accessible computers, and delete all traces of the attack. This second goal, if successful, would have lengthened recovery time considerably.
Industroyer2, which shares source code with the original Industoyer, is a windows malware containing IEC-104 commands that aim to disrupt high-voltage electricity.
It was deployed under the file name 108_100.exe and contains hard coded IP addresses of the Ukrainians plant. This indicates the attack had been planned in advance.
Also, the binary was compiled two weeks prior to the attack, which means the attack was preceded by a reconnaissance stage. It was intended to be launched via a scheduled task on April 8, 2022 at 4:10 pm local time. A second task scheduled for 4:20 pm would have wiped the attacking device and erased all traces of the malware.
In addition to the Industoyer2 malware, researchers also found evidence of a new wiper variant, CaddyWiper. This aimed to encrypt ICS consoles, and slow down the plant’s recovery. CaddyWiper was intended to be spread via Group Policy, in order to wipe as many devices as possible.
There was a second wiper targeting Linux/Solaris hosts. In this case, a worm-style bash script sc.sh was written to iterate all accessible network devices via SSH via pre-supplied credentials. This would then, in turn, spread to other devices via the same techniques, and finally wipe all host’s data. There are two versions of the wiper, one for Solaris and the other for Linux based systems.
The Aftermath Of The Industroyer2 Attack
While researchers have not yet determined the exact reason why Industroyer2 failed to complete its mission, they have made it clear that there is no immediate danger from the malware. The same exact build of Industroyer2 cannot be used against electricity plants other than the one it originally targeted, as it contains hard coded IP addresses, and uses only the IEC-104 protocol.
Following the Industroyer2 attack, US government agencies CISA, DOE, the NSA and the FBI issued a joint Cybersecurity Advisory warning that “certain advanced persistent threat (APT) actors have exhibited the capability to gain full system access to multiple industrial control system (ICS)/supervisory control and data acquisition (SCADA) devices, including
- Schneider Electric programmable logic controllers (PLCs),
- OMRON Sysmac NEX PLCs, and
- Open Platform Communications Unified Architecture (OPC UA) servers.”
This is a developing story, and this blog will be updated as new information becomes available.
How The SCADAfence Platform Protects Critical Infrastructure
The SCADAfence platform protects against the TTPs used by Industroyer2.
A malware attack such as the one launched on April 8th, would have triggered a variety of critical alerts on the SCADAfence Platform.
- Affected machines with the wiper worm would trigger “Network Scanner” when scanning the /24 network to find targets to wipe. Additionally, the SFTP User Activity feature would show the propagation attempts by the attackers.
- The “Scheduled Task – remote process execution” alert would be seen when Industroyer2 was triggered to run at a specific time.
- An irregular connection to OT assets would immediately trigger a “New connection to industrial device” alert.
- Any value changes sent via the IEC-104 protocol would be instantly detected.
- Reconnaissance stage communications from compromised host to attacker C&C would also trigger an “Unauthorized outbound connection from IT related device” alert.
For additional information on how SCADAfence protects against industrial cyber attacks, and helps industrial organizations, read our previous article on The Russia-Ukraine Conflict from an Industrial Cybersecurity Perspective
Follow Best Practices to Stay ProtectedAs always, the SCADAfence team recommends following accepted best practices, including
- Employing network segmentation to separate sensitive applications (e.g. PCN) from other network parts via firewalls,
- Always keeping secure offline backups up-to-date,
- Encrypting sensitive data, and using MFA on OT assets.
For additional information about how SCADAfence can protect critical infrastructure, please contact us to request a demo today.
About Version 2
Version 2 is one of the most dynamic IT companies in Asia. The company develops and distributes IT products for Internet and IP-based networks, including communication systems, Internet software, security, network, and media products. Through an extensive network of channels, point of sales, resellers, and partnership companies, Version 2 offers quality products and services which are highly acclaimed in the market. Its customers cover a wide spectrum which include Global 1000 enterprises, regional listed companies, public utilities, Government, a vast number of successful SMEs, and consumers in various Asian cities.
SCADAfence helps companies with large-scale operational technology (OT) networks embrace the benefits of industrial IoT by reducing cyber risks and mitigating operational threats. Our non-intrusive platform provides full coverage of large-scale networks, offering best-in-class detection accuracy, asset discovery and user experience. The platform seamlessly integrates OT security within existing security operations, bridging the IT/OT convergence gap. SCADAfence secures OT networks in manufacturing, building management and critical infrastructure industries. We deliver security and visibility for some of world’s most complex OT networks, including Europe’s largest manufacturing facility. With SCADAfence, companies can operate securely, reliably and efficiently as they go through the digital transformation journey.